 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HMC646LP2 / 646LP2E v01.0707 GaAs MMIC 40W FAILSAFE SWITCH, 0.1 - 2.1 GHz Typical Applications The HMC646LP2(E) is ideal for: * LNA Protection & T/R Switching * TD-SCDMA / 3G Infrastructure * Satellite Subscriber Terminals * Private Mobile Radio & Public Safety Handsets * Automotive Telematics Features High Input P0.1 dB: +46 dBm Tx Low Insertion Loss: 0.4 dB High IIP3: +74 dBm Single Positive Control: 0/+3V to 0/+8V Failsafe operation; Tx `On' when unpowered 2x2mm DFN SMT Package 9 Functional Diagram General Description The HMC646LP2(E) is an SPDT switch in a leadless DFN surface mount plastic package for use in transmit / receive and LNA protection applications which require very low distortion and high power handling of up to 40 watts with less than 10% duty cycle. This robust switch can control signals from 100 - 2100 MHz* and is ideal for TD-SCDMA / 3G repeaters, PMR, automotive telematics, and satellite subscriber terminal applications. The design provides exceptional P0.1 dB of +46 dBm and +74 dBm IIP3 on the Transmit (Tx) port. The failsafe topology provides a low loss path from Tx to RFC, when no DC power is available. SWITCHES - SMT Electrical Specifications, TA = +25C, Vdd= 5V, Vctl = 0/+5 Vdc, 50 Ohm System* Parameter Frequency Range Insertion Loss Isolation Return Loss Input Power for 0.1 dB Compression Input Third Order Intercept (Two-tone input power = +17 dBm each tone) Switching Characteristics tRISE, tFALL (10/90% RF) tON, (50% CTL to 90% RF) tOFF (50% CTL to 10% RF) 100 320 320 100 320 320 100 320 320 ns ns ns Tx - RFC RFC - Rx Tx - RFC RFC - Rx Tx - RFC RFC - Rx Tx - RFC RFC - Rx Tx - RFC RFC - Rx 20 28 Min. Typ. 869 - 960 0.3 0.4 27 38 17 25 44 20 71 41 0.6 0.7 15 20 Max. Min. Typ. 1525 - 1661 0.6 0.8 22 30 27 20 46 20 74 42 0.9 1.1 12 25 Max. Min. Typ. 2010 - 2025 0.7 1.3 17 32 25 12 46 20 74 34 1.0 1.7 Max Units MHz dB dB dB dB dB dB dBm dBm dBm dBm * Specifications and data reflect HMC646LP2 measured using the respective application circuits for each designated frequency band found herein 9 - 372 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC646LP2 / 646LP2E v01.0707 GaAs MMIC 40W FAILSAFE SWITCH, 0.1 - 2.1 GHz Insertion Loss vs. Temperature, Tx with 915 MHz Tuning 0 -0.25 INSERTION LOSS (dB) -0.5 -0.75 -1 -1.25 -1.5 -1.75 -2 0.8 +25C +85C -40C Insertion Loss vs. Temperature, Rx with 915 MHz Tuning 0 -0.25 INSERTION LOSS (dB) -0.5 -0.75 -1 -1.25 -1.5 -1.75 -2 0.8 +25C +85C -40C 0.85 0.9 FREQUENCY (GHz) 0.95 1 0.85 0.9 FREQUENCY (GHz) 0.95 1 9 SWITCHES - SMT Isolation with 915 MHz Tuning 0 -5 -10 ISOLATION (dB) -15 -20 -25 -30 -35 -40 -45 -50 0.8 0.85 0.9 FREQUENCY (GHz) 0.95 1 Return Loss with 915 MHz Tuning 0 -5 RETURN LOSS (dB) Tx, Input Tx, Output Rx, Input Rx, Output RFC to Tx RFC to RX -10 -15 -20 -25 -30 -35 -40 0.8 0.85 0.9 FREQUENCY (GHz) 0.95 1 Input IP3 vs. Voltage with 915 MHz Tuning 75 70 65 60 IP3 (dBm) 55 50 45 40 35 30 25 3 4 5 6 7 8 VOLTAGE (V) Tx Rx For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 373 HMC646LP2 / 646LP2E v01.0707 GaAs MMIC 40W FAILSAFE SWITCH, 0.1 - 2.1 GHz Insertion Loss vs. Temperature, Tx with 1600 MHz Tuning 0 -0.25 INSERTION LOSS (dB) -0.5 -0.75 -1 -1.25 -1.5 -1.75 -2 1.5 +25C +85C -40C Insertion Loss vs. Temperature, Rx with 1600 MHz Tuning 0 -0.25 INSERTION LOSS (dB) -0.5 -0.75 -1 -1.25 -1.5 -1.75 -2 1.5 +25C +85C -40C 9 SWITCHES - SMT 1.55 1.6 FREQUENCY (GHz) 1.65 1.7 1.55 1.6 FREQUENCY (GHz) 1.65 1.7 Isolation with 1600 MHz Tuning 0 -5 -10 ISOLATION (dB) -15 -20 -25 -30 -35 -40 -45 -50 1.5 1.55 1.6 FREQUENCY (GHz) 1.65 1.7 Return Loss with 1600 MHz Tuning 0 -5 RETURN LOSS (dB) Tx, Input Tx, Output Rx, Input Rx, Output RFC to Tx RFC to RX -10 -15 -20 -25 -30 -35 -40 1.5 1.55 1.6 FREQUENCY (GHz) 1.65 1.7 Input IP3 vs. Voltage with 1600 MHz Tuning 80 75 70 65 IP3 (dBm) 60 55 50 45 40 35 30 25 3 4 5 6 7 8 VOLTAGE (V) Tx Rx 9 - 374 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC646LP2 / 646LP2E v01.0707 GaAs MMIC 40W FAILSAFE SWITCH, 0.1 - 2.1 GHz Insertion Loss vs. Temperature, Rx with 2015 MHz Tuning 0 -0.25 INSERTION LOSS (dB) -0.5 -0.75 -1 -1.25 -1.5 -1.75 -2 1.95 +25C +85C -40C Insertion Loss vs. Temperature, Tx with 2015 MHz Tuning 0 -0.25 INSERTION LOSS (dB) -0.5 -0.75 -1 -1.25 -1.5 -1.75 -2 1.95 +25C +85C -40C 2 2.05 2.1 2 2.05 2.1 9 SWITCHES - SMT FREQUENCY (GHz) FREQUENCY (GHz) Isolation with 2015 MHz Tuning 0 -5 Return Loss with 2015 MHz Tuning 0 -5 RETURN LOSS (dB) Tx, Input Tx, Output Rx, Input Rx, Output -10 ISOLATION (dB) -15 -20 -25 -30 -35 -40 1.95 RFC to Tx RFC to RX -10 -15 -20 -25 -30 -35 1.95 2 2.05 2.1 2 2.05 2.1 FREQUENCY (GHz) FREQUENCY (GHz) Input IP3 vs. Voltage with 2015 MHz Tuning 80 75 70 65 60 IP3 (dB) 55 50 45 40 35 30 25 3 4 5 6 7 8 VOLTAGE (V) Tx Rx For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 375 HMC646LP2 / 646LP2E v01.0707 GaAs MMIC 40W FAILSAFE SWITCH, 0.1 - 2.1 GHz Absolute Maximum Ratings Vdd= 5V Max. CW Input Power Max Channel Temp. Thermal Resistance Continuous Dissipated Power Supply Voltage (Vdd) Tx Port Rx Port Tx Port Rx Port Tx Port Rx Port +44.00 dBm +36.75 dBm 150 C 14.75 C/W 14.75 C/W 4.4 W 4.4 W +10V Vdc -0.2 to Vdd + 1.0 Vdc -65 to +150 C -40 to +85 C Truth Table Control Input Vctl 0.0 Vdd Vdd Vdd Vdd Signal Path State RFC To Tx OFF ON RFC to Rx ON OFF Vdd = +3.0V to +8.0V Control Input Voltage Tolerances are 0.2 Vdc. DC blocking capacitors are required at ports RFC, Tx and Rx. 9 SWITCHES - SMT Control Voltage Range (Vctl) Storage Temperature Operating Temperature ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number HMC646LP2 HMC646LP2E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] 646 XXX 646 XXX [2] [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 3-Digit lot number XXX 9 - 376 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC646LP2 / 646LP2E v01.0707 GaAs MMIC 40W FAILSAFE SWITCH, 0.1 - 2.1 GHz Pin Descriptions Pin Number 1 Function Tx Description This pin is DC coupled and matched to 50 Ohms. Interface Schematic 2 N/C Not Connected 3 ACG External capacitor to ground is required. See application circuit herein. 4 Rx This pin is DC coupled and matched to 50 Ohms. 9 SWITCHES - SMT 9 - 377 5 Vctl See truth table. 6 RFC This pin is DC coupled and matched to 50 Ohms. GND Package bottom has exposed metal paddle that must be connected to PCB RF ground. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC646LP2 / 646LP2E v01.0707 GaAs MMIC 40W FAILSAFE SWITCH, 0.1 - 2.1 GHz Application Circuit 9 SWITCHES - SMT Components for Selected Frequencies Tuned Frequency Evaluation PCB Number C1, C3, C5 [1] C2 C4 C6 C7 L1 L2 R1 [1] DC blocking capacitors 915 MHz 118098 1000 pF 2.7 pF 1000 pF 1.8 pF 15 pF 15 nH 9 nH 10 k 1600 MHz 118099 330 pF 1.5 pF 100 pF 0.5 pF 4.7 pF 3.9 nH 4.3 nH 10 k 2015 MHz 118100 330 pF 1.1 pF 100 pF 0.5 pF 2.7 pF 1.8 nH 3.3 nH 10 k 9 - 378 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC646LP2 / 646LP2E v01.0707 GaAs MMIC 40W FAILSAFE SWITCH, 0.1 - 2.1 GHz Evaluation PCB 9 SWITCHES - SMT List of Materials for Evaluation PCB [1] Item J1 - J3 J4 - J5 C1 - C7 [2] L1 - L2 [2] R1 [2] U1 PCB [3] Description PCB Mount SMA RF Connector 2mm DC Header Capacitor, 0402 Pkg. Inductor, 0402 Pkg. Resistor, 0402 Pkg. HMC646LP2(E) T/R Switch 110780 Evaluation PCB The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. [1] When requesting an evaluation board, please reference the appropriate evaluation PCB number listed in the table "Components for Selected Frequencies." [2] Please refer to `Components for Selected Frequencies' table for values. [3] Circuit Board Material: Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 379 |
Price & Availability of HMC646LP2
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |